X-LOCK

X-LOCK - Thread Locking Compound by Maxwell Oil Tools

With exceptional breakout torque capacity and low coefficient friction during makeup, X-LOCK is the perfect solution for even the most challenging downhole needs.

Request your sample!

Use our form and order your sample today.

Download Technical Data Sheet

Click and download our TDS for this product

Why Choose X-LOCK

Maximum Reliability:

X-LOCK’s flexibilized epoxy resin component minimizes degradation due to vibration, ensuring maximum reliability in the toughest downhole conditions.

High Efficiency:

Our user-friendly 5:1 mix ratio by weight means that you can easily and accurately mix X-LOCK for efficient and effective application.

Exceptional Strength:

With a breakout torque of over 120,000 ft-lb and a makeup friction factor of 1.0, X-LOCK provides direct adhesion of over 6,497.6 Psi, tensile strength of over 7,627.53 Psi, compressive strength of over 13,104.15 Psi, and flexural strength of over 6,091.58 Psi.

Supreme Endurance:

X-LOCK can withstand temperatures ranging from -40°C to 150°C, with even higher temperature resistance available upon request.

Maximum Reliability:

X-LOCK’s flexibilized epoxy resin component minimizes degradation due to vibration, ensuring maximum reliability in the toughest downhole conditions.

High Efficiency:

Our user-friendly 5:1 mix ratio by weight means that you can easily and accurately mix X-LOCK for efficient and effective application.

Exceptional Strength:

With a breakout torque of over 120,000 ft-lb and a makeup friction factor of 1.0, X-LOCK provides direct adhesion of over 6,497.6 Psi, tensile strength of over 7,627.53 Psi, compressive strength of over 13,104.15 Psi, and flexural strength of over 6,091.58 Psi.

Supreme Endurance:

X-LOCK can withstand temperatures ranging from -40°C to 150°C, with even higher temperature resistance available upon request.

Putting X-LOCK to Work

Easy to use

X-LOCK is a two-component adhesive supplied in kits with the correct mix ratio, making it easy to use. Simply pour in the B part to the larger tin (A component), mix thoroughly, and apply a thin layer around the first two-thirds of the PIN thread only. (X-LOCK should be applied on clean, bare metal, free of any residual dope or contaminants).

Maximum reliability

X-LOCK can be stored at room temperature for up to 2 years, providing you with a reliable solution for all your downhole needs.

Up to 10 locks

One X-LOCK kit contains 8 oz of thread-locking compound, hardener vial, and spatula. Each X-LOCK kit will lock a range of casings, with up to 10 locks for 4 1/2″ casing.

Choose X-LOCK

For exceptional breakout torque capacity and low coefficient friction during makeup, providing you with maximum reliability in challenging downhole conditions. Order X-LOCK today from Maxwell Oil Tools, and enhance the endurance of your downhole tubulars.

Easy to use

X-LOCK is a two-component adhesive supplied in kits with the correct mix ratio, making it easy to use. Simply pour in the B part to the larger tin (A component), mix thoroughly, and apply a thin layer around the first two-thirds of the PIN thread only. (X-LOCK should be applied on clean, bare metal, free of any residual dope or contaminants).

Maximum reliability

X-LOCK can be stored at room temperature for up to 2 years, providing you with a reliable solution for all your downhole needs.

Up to 10 locks

One X-LOCK kit contains 8 oz of thread-locking compound, hardener vial, and spatula. Each X-LOCK kit will lock a range of casings, with up to 10 locks for 4 1/2″ casing.

Choose X-LOCK

For exceptional breakout torque capacity and low coefficient friction during makeup, providing you with maximum reliability in challenging downhole conditions. Order X-LOCK today from Maxwell Oil Tools, and enhance the endurance of your downhole tubulars.